您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 24680-2009 农用喷雾机 喷杆稳定性 试验方法

作者:标准资料网 时间:2024-05-13 07:38:52  浏览:8405   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:农用喷雾机 喷杆稳定性 试验方法
英文名称:Agricultural sprayers—Boom steadiness—Test methods
中标分类: 农业、林业 >> 农、林机械与设备 >> 农机具
ICS分类: 农业 >> 农业机械、工具和设备 >> 植保设备
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2009-11-30
实施日期:2010-04-01
首发日期:2009-11-30
作废日期:
主管部门:全国农业机械标准化技术委员会(SAC/TC 201)
提出单位:中国机械工业联合会
归口单位:全国农业机械标准化技术委员会(SAC/TC 201)
起草单位:中国农业机械化科学研究院、农业部南京农业机械化研究所、江苏大学、浙江大农实业有限公司
起草人:严荷荣、陈俊宝、傅锡敏、吴春笃、皇才进、王洪仁
出版社:中国标准出版社
出版日期:2010-04-01
页数:16页
计划单号:20072480-T-604
适用范围

本标准规定了农用大田喷雾机喷杆稳定性的试验条件和试验方法。
本标准适用于评价喷杆喷雾机的喷杆稳定性和悬挂性能,并确定喷杆的运动特性。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成的协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T10910-2004 农业轮式拖拉机和田间作业机械 驾驶员全身振动的测量

所属分类: 农业 林业 农 林机械与设备 农机具 农业 农业机械 工具和设备 植保设备
下载地址: 点击此处下载
【英文标准名称】:Ultrasonics-Pressurepulselithotripters-Characteristicsoffields(IEC61846:1998);GermanversionEN61846:1998
【原文标准名称】:超声波.压力脉冲碎石器.电磁场特性
【标准号】:DINEN61846-1999
【标准状态】:现行
【国别】:德国
【发布日期】:1999-04
【实施或试行日期】:1999-04-01
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:水听器;电气器具;碎裂;医疗设备;超声波医用器具;肾;医学科学;符号;医用电气设备;规范(验收);设备安全;定义;精密度;测量技术;额定值;机械安全;超声波学;超声波装置
【英文主题词】:
【摘要】:Extracorporeallithotripsyiswidelyusedfortheclinicaltreatmentofrenalandureticstones.Lithotripsyemployshighintensityacousticwavestoproducedisintegrationofthestonesthroughaprocessofsequentialapplicationofpressurewaves.Severaldifferentformsoflithotripsyequipmentarenowcommerciallyavailablefromanumberofmanufacurers.Thedocumentspecifiesmethodsofmeasuringandcharacterisingtheacousticpressurefiledgeneratedbylithotripsyequipment.
【中国标准分类号】:C41
【国际标准分类号】:11_040_60
【页数】:15P;A4
【正文语种】:德语


MIL-DTL-38219D, DETAIL SPECIFICATION: TURBINE FUEL, LOW VOLATILITY, JP-7 (21 AUG 1998) [SUPERSEDING MIL-PRF-38218C]., This specification covers one grade of aviation turbine fuel designated as JP-7. This specification was thoroughly reviewed as a part of acquisition reform. While most of the requirements were converted to performance terms, due to the military-unique nature of the product and the need for compatibility with deployed systems, it was determined that not all requirements could be converted. The issuance of this specification as "detail" is not intended to constrain technology advances in future systems.